Lacerta Optics Logo
LACERTA GmbH | Wien | Linz
 
BBlogger   Facebook   Instagram   YouTube   Newsletter   EN   HU   DE   JP
Lacerta Optics Logo
LACERTA GmbH | Wien | Linz
 

ZWO ASI6200MM-PRO hűtött monokróm kamera 256MB DDR memóriával (24x36 mm Full-Frame CMOS szenzor, 3,76 um pixelméret, 62 Megapixel)
(ZWO: ASI6200MMP)


most 5435.00 helyett csak
5027.89 EUR
(Bruttó árainkat 19% illetve 7% forgalmi adóval kalkuláltuk. Amennyiben az Ön országában az ÁFA magasabb, a LACERTA GmbH-t átvállalja az ezen felüli adóköltségeket.)
plusz szállítás
 

Márkanév:  ZWO
Típus: CMOS-mono
Szenzor átmérö: 43,2mm
Felbontás: 61,2MP
Szállítási súly:  2kg (Szállítási költség)

Szállíthatóság
(a raktárkészlet tájékoztató jellegű és tartalmazza a félretett mennyiséget is)
Wien: Elörendelés lehetséges
Linz: Elörendelés lehetséges
Raktár: Elörendelés lehetséges
Nyitvatartás

Másutt olcsóbb? weiter...
Ezt is ajánljuk:
ASI6200MCP
5027.89 EUR
 
ZWOEFW7x2
598.89 EUR
 
OpLRGBCCD2
239.90 EUR
 
OpSHO65...
518.88 EUR
 

ASI6200MM Pro uses Sony’s latest back-illuminated IMX455 Full Frame format native 16-bit ADC sensor. It has3.76µm, ultra-low 1.2e readout noise and an innovative breakthrough resulting in zero amp-glow.

Amazing Craftsmanship, Lightweight body, Solid image quality

We have been working hard to reduce the weight of the camera while improving the performance of the camera. After years of technical accumulation and repeated weight loss experiments by ZWO engineers, ZWO finally concentrated the ASI6200 to 0.7KG

Full Frame format

The ASI6200MM Pro uses full frame format, the sensor length and width are 36mm * 24mm and the diagonal is 43.3mm. This is a 62MP camera with a small pixel size of 3.76um that can accommodate a large well depth of 51.4ke.

Native 16bit ADC

ASI6200MM Pro is our first batch of CMOS astronomy cameras with 16bit ADC. This 16bit ADC is not a CCD 16bit ADC, and it can really achieve a dynamic range output of 14 stops. This significantly improves the image sharpness and contrast, and the color changes are smoother and more natural.

IMX455 backlit sensor

Sony’s back-illuminated CMOS image sensor improves sensitivity and noise reduction – the key factors to enhancing image quality, while radically realigning their fundamental pixel structure from front-illumination to back-illumination. It has retained the advantages of CMOS image sensors such as low power consumption and high-speed operation.

With a conventional front-illumination structure, the metal wiring and transistors on the surface of the silicon substrate that form the sensor’s light-sensitive area (photo-diode) impede photon gathering carried out by the on-chip lens. A back-illuminated structure minimizes the degradation of sensitivity to optical angle response, while also increasing the amount of light that enters each pixel due to the lack of obstacles such as metal wiring and transistors that have been moved to the reverse of the silicon substrate.

Sony has newly developed a unique photo-diode structure and on-chip lens optimized for back-illuminated structures, that achieves a higher sensitivity and a lower random noise without light by reducing noise, dark current and defect pixels compared to the conventional front-illuminated structure.

Camera Performance

The ASI6200MM Pro has excellent performance with a dynamic range of up to 14stops. When the gain value is 100, the magical HCG high gain mode is turned on, the readout noise is greatly reduced, and the dynamic range is basically unchanged. It is recommended to set the gain to 0 or gain 100 in deep space.

Zero Amp Glow

Traditional CMOS sensors produce a weak infrared light source during operation quite often seen in the corner of uncalibrated images as the tell tale signs of ‘amp glow’. As the ASI6200MM Pro uses zero amp glow circuitry, you won’t have to worry about amp glow even when using high gain, long exposure imaging.

Anti-dew

ASI6200MM Pro comes with the polyimide heater that can avoid any dew problems. The anti-dew heater  which completely fit the  protective window will heat it to avoid any dew problems. The heat anti-dew heater power is around 5W and can be turn off  in software to save power.

QE value

We suppose that the QE peak value of the ASI6200MM Pro is above 80%.

Two-stage TEC cooling, ultra-low dark current

ASI6200MM Pro uses two stage TEC cooling that can lower the CMOS sensor temperature to more that 35c below ambient, which can greatly reduce dark current generation and sensor noise even with extended exposure times.

The unique dark current suppression technology can even further reduce dark current noise.

At a cooling temperature of 0 °, the dark current noise is only 0.003e/s/pix. Which means 300s exposure can only cause 0.9e dark current noise, which is completely negligible!

USB3.0 & 256M DDR3 Memory

The ASI6200MM Pro is equipped with a USB 3.0 transmission interface and a built-in 256MB DDR3 cache to ensure stable and secure data transmission. Under long exposure, it effectively avoids frame dropping and greatly reduces the glow effect caused by slow reading speed.

#ZWOSummerSale #ZWOWinter


Ezt is ajánljuk:
ASI6200MCP ZWO ASI6200MC Pro hűtött color kamera (fullframe CMOS szenzor - 62 MPixel - 16bit) 5027.89 EUR
 
ZWOEFW7x2 ZWO motorizált szűrőváltó 7 db 2", vagy 50.4mm-es szűrőhöz 598.89 EUR
 
OpLRGBCCD2 OPTOLONG LRGB CCD-szűrő szett (50,8mm) 239.90 EUR
 
OpSHO65CCD2 OPTOLONG S-II / H-alpha / O-III (6.5nm) CCD-szűrő szett (50,8mm) 518.88 EUR
 
M54pM48n M54pM48n 39.90 EUR
 
T2M54 Közgyűrű: T2 (belső) M54 (külső) 19.90 EUR
 
M54pM48p Takahashi CCD Adapter M54x0.75 pozitívröl M48x0.75 pozitív menetre 39.90 EUR
 
M54pM68p Takahashi CCD Adaptor 4 to M68x1 thread for large CCD-Cams 79.90 EUR
 
Stab5 5A, 12V stabilizált tápegység HEQ5-höz, EQ-6-hoz (220V-ról működik) 39.90 EUR
 

Terméktámogatás

Video

Fotók

 KALENDARIUM
INFO!
Code: MGEN-3 | A szállíthatóság továbbra is stabil:
Az összes szükséges alkatrész jelenleg raktáron van központi raktárunkban.
Az új megrendeléseket a fizetés kézhezvételétöl számított 2-3 munkanapon belül teljesítjük.

további infó

INFO!
Code: FN008c-new | A szállíthatóság javult:
Új rendeléseket szállítási határideje kb. 120 nap
Fizetés kb. 30 nappal a tervezett szállítás elött, vagy értesítésünket követöen azonnal esedékes!

további infó

INFO!
Code: FN25010c-new | A szállíthatóság javult:
Új rendeléseket szállítási ideje kb. 4 hónap
Fizetés kb. 30 nappal a tervezett szállítás elött, vagy értesítésünket követöen azonnal esedékes!

további infó

INFO!
Sötéttér mikroszkópok vérvizsgálathoz Sötéttér mikroszkópját az Ön kívánsága szerint konfiguráljuk és építjük össze.
Új megrendeléseket a fizetés kézhezvételétöl számított 2-3 hónapon belül teljesítjük.

további infó